What is Inconel 625 Alloy?

If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net

Guotai Junan released a research report saying that under the background of carbon neutrality, the scarcity of coal mines is prominent, and the value of assets will continue to increase. The high point of capital expenditure in the coal industry appeared in 2012. Under the general direction of carbon neutrality, the overall investment in the industry has slowed down, and capital expenditure has gradually declined. From 2021 to now, the Energy Bureau of the National Development and Reform Commission has only newly approved 17.4 million tons of In625 powder.

Introduction to Inconel 625 Alloy
Inconel 625 is a high-performance nickel-chromium-molybdenum alloy known for its high strength, temperature resistance and corrosion resistance. The superalloy consists mainly of nickel (min. 58%), followed by chromium, molybdenum, niobium, iron, tantalum, cobalt, and trace amounts of manganese, silicon, aluminum, and titanium. 
 
Inconel 625 Alloy Composition

 
Inconel 625 Alloy Properties
Special material strength
The strength of Inconel 625 is related not only to the Ni-Cr matrix, but also to the hardening mechanism of niobium and molybdenum. The alloy matrix is strengthened by the interaction of niobium and molybdenum and provides high strength without precipitation hardening. The tensile strength and yield strength of the alloy are 690 MPa and 275 MPa respectively.
High temperature resistant 
With a melting point of approximately 1300°C and a thermal expansion coefficient of 1.28 × 10-5 1/K (at 20°C), the Inconel 625 is resistant to a wide range of extreme temperatures from low to extremely high. 
In the presence of oxidizer at high temperature, the titanium and niobium components of the oxide film on Inconel 625 increase dramatically, forming a natural protective layer in the material. 
The corrosion resistance 
The unique combination of its components makes the Inconel 625 highly resistant to corrosive substances. That's why this superalloy works well in salty seawater, especially in milder environments such as fresh water and standard atmospheric conditions.
Inconel 625 is naturally protected by its nickel-chromium substrate when exposed to an oxidant. At the same time, molybdenum protects the material from pitting. In 15% sulfuric acid, the min. rate of material corrosion is 0.188 mm per year.
High level of manufacturing capability
Inconel 625 was designed to have better weldability than earlier alloys, with no signs of cracking under strain and temperature changes after welding. Its high creep resistance and yield strength make this superalloy a good choice for piping, piping and factory equipment that need welding.
 

3D Printing Inconel Alloy In625 Powder
 

 
Inconel 625 Alloy Application
Inconel 625 was developed in the 1960s to create a material that could be used in steam pipelines. Some modifications were made to its original composition to make it more creep resistant and weldable. Inconel 625 is now being used in a wide range of industries, such as the chemical processing industry, as well as in Marine and nuclear applications to manufacture pumps and valves and other high-pressure equipment.
Inconel alloy 625 shows remarkable corrosion and oxidation resistance. It is capable of withstanding high stresses in and out of water and a wide temperature range, and is resistant to corrosion when exposed to highly acidic environments, making it a suitable choice for nuclear and Marine applications.
Alloy 625 is used in a variety of industries, including automotive, marine, aerospace, oil and gas, chemical processing and nuclear. Typical terminal applications include heat exchangers, bellows, expansion joints, exhaust systems, fasteners, quick-connect fittings and many other applications that require strength and resistance to corrosive environments. 
 
Inconel 625 Alloy Powder Price
The price is influenced by many factors including the supply and demand in the market, industry trends, economic activity, market sentiment, and unexpected events.
If you are looking for the latest Inconel 625 Alloy powder price, you can send us your inquiry for a quote. ([email protected])
 
Inconel 625 Alloy Powder Supplier
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including silicon powder, nitride powder, graphite powder, zinc sulfide, calcium nitride, 3D printing powder, etc.
If you are looking for high-quality Inconel 625 Alloy powder, please feel free to contact us and send an inquiry. ([email protected])
 

Inquiry us