News

  • 0
  • 0

Global Silicon Nitride powder market trend 2022-2026 What is Silicon Nitride Si3N4 Powder? by Newspsp-vault

For billionaires, the new crown epidemic is like a 'gold rush'! The Deutsche Presse-Agentur said on the 17th that in 2022, the wealth held by the world's top ten richest people will jump from $700 billion to $1.5 trillion, an average daily increase of $1.3 billion, an increase that exceeds the past 14 years. These 10 people The wealth held by the world’s poorest 3.1 billion people is six times greater than that of the world’s poorest 3.1 billion people. The 10 richest Germans have increased their assets from the equivalent of about 125 billion euros to about 223 billion euros since the start of the Covid-19 pandemic, An increase of about 78%. This wealth is roughly equivalent to the total wealth of the poorest 40% of the population, or 33 million Germans.
In the future, demand for Silicon Nitride powder will grow as fast as the wealth of the rich during the pandemic.

Introduction to Silicon Nitride Si3N4 Powder
Silicon nitride is a kind of inorganic substance, the chemical formula is Si3N4. The relative molecular mass is 140.28. Gray, white or off-white.
 

Physicochemical Properties of Silicon Nitride Si3N4 Powder
Si3N4 is a high-temperature insoluble compound. It has properties of high-temperature creep resistance. Hexagonal system. Crystals are hexahedral. The density of Si3N4 obtained by the reaction sintering method is 1.8-2.7 g/cm3, and the density of Si3N4 obtained by the hot-pressing method is 3.12-3.22 g/cm3. The Mohs hardness is 9~9.5, Vickers hardness is about 2200, and the microhardness is 32630MPa. The melting point is 1900 (under pressure). It usually decomposes at about 1900 at atmospheric pressure. Specific heat capacity is 0.71J/(g·K). The heat of formation is -751.57kJ/mol. The thermal conductivity is (2-155) W/(m·K). The linear expansion coefficient is 2.8~3.2×10-6/(20~1000). 
Insoluble in water. Soluble in hydrofluoric acid. The temperature at which oxidation begins in the air is 1300~1400. The specific volume resistance is 1.4×105 ·m at 20 and 4×108 ·m at 500. The elastic modulus is 28420~46060MPa. The compressive strength is 490MPa (reaction sintering). At 1285, it reacts with dicalcium diazide to form calcium diazide. At 600, the transition metal is reduced and nitrogen oxides are released. The bending strength is 147MPa. It can be made by heating silicon powder in nitrogen or reacting silicon halide with ammonia. The resistivity is between 10^15-10^16Ω.cm. It can be used as high-temperature ceramic material. 
Except for hydrofluoric acid and hot phosphoric acid, silicon nitride does not react with other inorganic acids and has strong corrosion resistance. 
 

Silicon Nitride Si3N4 Powder Properties
Other Names silicon (IV) nitride, α-Si3N4, SiN, trisilicon tetranitride, Si3N4 powder
CAS No. 12033-89-5
Compound Formula Si3N4
Molecular Weight 140.28
Appearance white to gray powder
Melting Point 1900°C
Boiling Point N/A
Density 2.2-3.5g/cm3
Solubility in H2O insoluble
Exact Mass 139.943

 

Silicon Nitride Si3N4 Powder CAS 12033-89-5
 

 
 

Applications of Silicon Nitride Si3N4 Powder
Silicon nitride ceramic material has the advantages of high thermal stability, high oxidation resistance, and high dimensional accuracy. Because the silicon nitride is the covalent compound with high bond strength, and it will form an oxide film in the air, it has good chemical stability. Silicon nitride is not oxidized below 1200, and a protective film can be formed at 1200~1600 to prevent it from further oxidation. Silicon nitride is not infiltrated or corroded by aluminum, lead, tin, silver, brass, nickel, and many other molten metals or alloys, but can be corroded by magnesium, nickel-chromium alloy, stainless steel, and other molten liquids.
Silicon nitride ceramic materials can be used in high-temperature engineering components, advanced refractory in the metallurgical industry, corrosion-resistant components and sealing components in the chemical industry, machining industry tools, and cutting tools.
Because silicon nitride can form a strong bond with silicon carbide, alumina, thorium dioxide, boron nitride, etc., it can be used as a bond material to modify with different proportions. 
In addition, silicon nitride can be used in solar cells. After the silicon nitride film is plated by the PECVD method, not only can it be used as an antireflection film to reduce the reflection of the incident light, but also, in the deposition process of a silicon nitride film, the hydrogen atom of the reaction product enters the silicon nitride film and silicon wafer, playing a role of passivation defect. The ratio of silicon nitride to silicon nitrogen atoms is not a strict 4:3, but fluctuates within a certain range according to different technological conditions. Different atomic ratios correspond to different physical properties of the film. 
Also, it can be used in ultra-high temperature gas turbines, aircraft engines, electric furnaces, etc. 
 

Main Supplier of Silicon Nitride Si3N4 Powder
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including silicon powder, nitride powder, graphite powder, zinc sulfide, calcium nitride, 3D printing powder, etc.
If you are looking for high-quality silicon nitride Si3N4 powder, please feel free to contact us and send an inquiry. ([email protected])

 

Since February, gold has enjoyed a smooth upward run on the back of surging US inflation and the brewing of war. While expectations of rate rises have also risen in tandem over this period, gold had been largely pre-priced and the underlying driver of tightening expectations had come from inflation continuing to rise to record highs. The risk aversion caused by the continued tension in the war also provided an important short-term support for gold. This will have a certain impact on the price of the Silicon Nitride powder and the market of the Silicon Nitride powder. 

Inquery us

Our Latest News

Global BAM powder market trend 2025-2029 High Purity BAM Aluminum Magnesium Boride AlMgB14 Powder by Newspsp-vault

The latest forecast from consulting firm AlixPartners is that the chip shortage may cost the global auto industry $110 billion; it will reduce global auto BAM powder. About AlMgB14 alloy powder:Aluminum boride or Al3Mg3B56, commonly known…

Global TaC powder market trend 2023-2027 Applications of Tantalum Carbide TaC Powder by Newspsp-vault

Prices in the national electricity market averaged $87 per megawatt-hour in the first three months of the year, above the level promised by the federal government. Wholesale electricity prices for industry and large businesses have already exceeded t…

Global concrete foaming agent market trend 2022-2028 Foam Concrete Advantages and Disadvantages by Newspsp-vault

Foam concrete is a lightweight, easy-to-use, and easy-to-finish material. For home improvement projects, such as building decks or other areas on the property, foam concrete may be a wise choice.…