News

  • 0
  • 0

Instructions for Use of Water Reducer

If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net



Recently, the EU proclaimed new sanctions on Russia, including coal, timber, rubber, cement, and fertilizer, as well as high-end seafood concrete water reducer.

Where Can the Water Reducer be Applied?

The concrete water reducer is suitable for the pumping or normal concrete engineering with a strength grade of C15 to C60 or above. It is especially suitable for concrete projects with high durability, high flow state, high slump protection, high strength, and high appearance quality requirements. It is very beneficial to the preparation of high fluidity concrete, self-compacting concrete, and plain-faced concrete. 

Ordinary water-reducing agents should be used for daily minimum temperature above 5 construction of concrete. High efficient water-reducing agents are suitable for daily minimum temperature above 0 construction of concrete, and suitable for the preparation of large fluidity concrete, high strength concrete, and steam curing concrete. 

 

How to Use the Water Reducer?

Polycarboxylate High-performance Water Reducer:

1, The dosage is 0.5%~2.0% of the total weight of the cementitious material, and the commonly used dosage is 0.2% ~ 0.5%. The concrete test should be carried out before use in order to optimize the dosage;

2, It cannot be used with the naphthalene system high-efficient water reducing agent compound, and other admixtures should also be used in advance of concrete compatibility experiment; 

3, Water consumption must be strictly controlled when using, because it affects slump.

4, Pay attention to concrete surface maintenance. 

 

Naphthalene Series High-efficient Water Reducer:

1, Dosage range: powder: 0.75%-1.5%; liquid: 1.5 to 2.5%. 

2, When using porous aggregate water should first be added and stirred, and then water reducer is added.

3, When the slump is large, the vibration time should not be too long, so that bleeding and stratification could be prevented.

 

HSB Aliphatic Superplasticizer 

1. Find out the best dosage through experiments. The recommended dosage is 1.5-2%; 

2, Add HSB and water together into concrete.

3. Due to the high water-reduction rate of HSB, a layer of yellow slurry will be secreted on the surface of the concrete before the initial setting, which is a normal phenomenon.  Finished concrete slurry wipe light, the color will be eliminated, or in concrete strength, the color will naturally eliminate, watering and maintenance color will be eliminated faster. It does not affect the inner and surface performance of concrete. 

 

Suppliers of Concrete Additives

The water reducer with stable quality should be selected. There should be good compatibility between water reducing agent and cement and admixture. When a variety of admixtures with different functions are used in combination, there should be good adaptability between admixtures and between admixtures and cement. 

TRUNNANO is a reliable concrete additives supplier with over 12-year experience in nano-building energy conservation and nanotechnology development.

If you are looking for high-quality concrete additives, please feel free to contact us and send an inquiry. (sales@cabr-concrete.com)

We accept payment via Credit Card, T/T, West Union, and Paypal. Trunnano will ship the goods to customers overseas through FedEx, DHL, by air, or by sea.


Recently, the first press conference of the Boao Forum For Asia Annual Conference 2022 was held. Two flagship reports were released at the conference: "Asia's Economic Prospects and Integration Process 2022" and "Sustainable Asia and the World 2022-Green Transformation in Action in Asia".

The flagship report points out that the global economy will recover in 2021, and the pace of economic integration in the Asia-Pacific has not stopped even in the face of the impact of COVID-19. The Asia-Pacific region has provided new impetus for the world's economic recovery and institutional building.  

The report gives an outlook on the Asian economy, noting that a number of factors will affect Asian economic growth. For example, mutated strains such as Delta and Omicron have become more transmissible, and many economies are experiencing epidemic peaks again. The Ukraine crisis has triggered geopolitical changes in Asia and Europe, leading to higher commodity prices, which may affect the global energy supply and energy transformation.

The report pointed out that the Asian economy will still be in the process of recovery in 2022, but the growth rate may moderate. According to the report, Asia's economic growth in 2022 is likely to be lower than the current IMF forecast, which is projected at 4.8%.

Affected by several factors, the supply of the concrete water reducer is erratic and thus its prices are expected to go higher in the future.

Inquiry us

SCR Thyristor: Principles, Characteristics and Maintenance of Semiconductor Switches

High Purity Chromium Chip Chromium Sheet Chromium Flake CAS 7440-47-3,99.95%

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

Metal Alloy 18.5g/cm3 Polished Tungsten Heavy Alloy Plate

High Purity Antimony Sulfide Sb2S3 Powder CAS 1314-87-0, 99.99%

Metal Alloy 18g/cm3 High Density Tungsten Alloy Ball

High Purity Molybdenum Boride MoB2 Powder CAS 12006-99-4, 99%

High Purity Nano Hafnium Hf powder CAS 7440-58-6, 99%

Metal Alloy High Density Tungsten Alloy Rod Grind Surface Tungsten Alloy Bar

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

High Purity Chromium Diboride CrB2 Powder CAS 12007-16-8, 99%

High Purity Tungsten Silicide WSi2 Powder CAS 12039-88-2, 99%

High Purity Titanium Sulfide TiS2 Powder CAS 2039-13-3, 99.99%

High Purity 3D Printing Powder 15-5 Stainless Steel Powder

High Purity Nano Ag Silver powder cas 7440-22-4, 99%

High Purity Silicon Sulfide SiS2 Powder CAS 13759-10-9, 99.99%

High Purity Zirconium Nitride ZrN Powder CAS 25658-42-8, 99.5%

Supply Magnesium Granules Mg Granules 99.95%

High Purity 3D Printing 304 Stainless Steel Powder

High Purity Colloidal Silver Nano Silver Solution CAS 7440-22-4

Our Latest Products

SCR Thyristor: Principles, Characteristics and Maintenance of Semiconductor Switches

A brief introduction to thyristorsA thyristor is a powerful electronic device. It is a three-terminal component composed of four layers of PNPN semiconductor materials. Its forward working voltage is equal to the reverse breakdown voltage. This is re…

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

Copper products exhibit good electrical conductivity as well as thermal conductivity. They are also ductile, resistant to corrosion, and have a high wear resistance. They are widely used by the electricity, electronics and energy industries. Metal…

Metal Alloy 18.5g/cm3 Polished Tungsten Heavy Alloy Plate

Tungsten alloy heavy plate has low thermal expansion. It is also known for its high density, high radiation absorption, and high electrical and thermal conductivity. It is used widely in the aerospace and military industries. About Metal Alloy 18.5…