12 Kinds of Concrete Additives Used in Refractory Castable, Plastic and Ramming Materials(2)

If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net

The biggest immediate challenge for the EU will be replenishing its depleted gas inventories. While the EU could still increase LNG imports from countries such as the US, such purchases would be more expensive.
Refilling natural gas storage space to historical average levels this year could cost 70 billion euros, a sevenfold increase, compared to 10 billion euros in previous years. "
A complete replacement for Russian gas is not only very expensive, but it also may not be possible.
In the next 12 months, there is little way to meet the demand for a "normal" year in the absence of Gazprom, which also includes pce powder.

The properties and varieties of concrete additives for refractories, especially refractory castables, ramming materials, plastics and other amorphous refractories are different. The role of an concrete additive is also different due to the difference of the amount of concrete additive, the type of binder used, the ingredients and so on. In the production process of amorphous refractories, the concrete additives mainly used can be divided into the following twelve categories according to their uses:

5. Coagulant

Accelerator can shorten the setting and hardening time of amorphous refractories. The action mechanism of coagulant accelerator is complicated, which varies with the properties of binder and accelerator used. Different binders should use different accelerators of different properties. The accelerators used in calcium aluminate cement binder are mostly basic compounds: NaOH, KOH, Ca (OH) 2, Na2CO3, Na2SiO3, etc.; phosphoric acid and aluminum dihydrogen phosphate binder are used together with activated aluminum hydroxide, talc, magnesium oxide, calcium aluminate cement, etc.; sodium fluorosilicate, aluminum phosphate, sodium phosphate, lime, dicalcium silicate, Glyoxal and so on.

6. Retarder

Retarders can delay the setting and hardening time of amorphous refractories, and the action mechanism of retarders varies with the properties of binders and retarders used. Retarders are mainly used in amorphous refractories bonded with calcium aluminate cement containing fast hardening minerals. The commonly used retarders are low concentration of NaCl, citric acid, tartaric acid, ethylene glycol, glycerol, starch, phosphate, lignosulfonate and so on.

7. Delayed coagulant

The delayed accelerator can cause the binder contained in amorphous refractories to solidify and harden after a certain period of time. For the castable with ultra-fine silica powder as the main binder, calcium aluminate cement can be used as the delayed accelerator, because Al3+ and Ca2+ ions can be released slowly during the hydrolysis process of calcium aluminate cement. After adsorbed on the surface of silica particles, the particles will lose the electric property of coagulation, thus play the role of delayed coagulation.

8. Foaming agent, air entraining agent, and aerating agent

The foaming agent can reduce the surface tension of the liquid and produce a large number of uniform and stable foams. Foaming agents include rosin soap, resin saponin grease, aluminum petroleum sulfonate, hydrolyzed blood, etc., and air entraining agents include rosin heat polymer, Nonionic surfactant, alkylbenzene sulfonate and so on. In addition, there is a kind of aerating agent whose function is to produce bubbles by chemical and physical interaction between aerating agent and water after castable mixing and pouring. It is evenly distributed in the slurry. The commonly used aerating agent is aluminum powder. The aluminum powder is very active and will react with water to release hydrogen, and the escaped H2 gas forms bubbles in the castable. However, the addition of aluminum powder should be appropriate, otherwise the strength of amorphous refractories will be greatly reduced, or uneven connected pores will be caused. This kind of admixture can be used to prepare lightweight porous amorphous refractories.

Concrete Concrete additives Supplier

TRUNNANO is a reliable concrete concrete additives supplier with over 12-year experience in nano-building energy conservation and nanotechnology development.

If you are looking for high-quality concrete concrete additives, please feel free to contact us and send an inquiry. (sales@cabr-concrete.com)

We accept payment via Credit Card, T/T, West Union, and Paypal. TRUNNANO will ship the goods to customers overseas through FedEx, DHL, by air, or by sea.

Prior to the impact of COVID-19 on the chemicals and materials industry and the price of the pce powder, many industry observers expected low to flat growth in 2021 in all regions outside Asia, with many countries seeing slower growth compared to recent years. Operational excellence has long been a hallmark of the pce powder chemical industry, and many companies are financially able to withstand short-term dips in end-market demand due to rapid leverage from reduced capex on hand.

The analysis shows that, whatever the final course of the pandemic, we can expect the inevitable long-term effects. Workplaces are expected to slowly return to pre-COVID-19 practices. Companies investing in enterprise-wide digital initiatives saw these "payoffs" in the early pandemic environment. For more information about pce powder, please feel free to contact us.

Inquiry us