High Purity Indium Tin Oxide ITO Powder, 99.9%

More information about Indium Tinoxidide ITO powder:
ITO Indium tin oxide Oder Indium doped tin oxide A ternary combination of different proportions of indium or tin and oxygen. You can call it a ceramic, or an alloy depending upon its oxygen content. Commonly encountered indium tin oxide The composition is oxygen-saturated and contains 74% in, 18%O2 and 8% Sn. Because oxygen-saturated compositions tend to be more common than unsaturated, they can also be called oxygen-deficient IOTO. It is translucent and colorless with a bulk that is pale yellow to grey. The thin layer acts almost like a metallic mirror when it is visible in the ultraviolet region.

Indium tin oxide Because of its high electrical conductivity and transparency as well as the ease at which thin films can be deposited, it is one of most commonly used transparent conductive oxides. Conductivity and transparency must be balanced, as increasing thickness and increasing concentrations of charge carriers can increase conductivity but decrease transparency.

Indium tin oxide films They are most often deposited onto the surface using physical vapor deposit. It is usually used electron beam or several sputtering methods.

ITO is an oxide mixed of indium and Tin. The melting point of ITO varies according to its composition. It can range from 1526 to 1926 degC. It is composed of ca In4Sn. This is an n type semiconductor that has a wide bandgap, approximately 4 eV. ITO can be seen through and exhibits high electrical conductivity. These characteristics are great for touch screen applications like mobile phones.

To receive the latest information, send us an inquiry Indium tin oxide price Please fill out the form below if you wish to buy Indium Tin Oxide ITO Powder In bulk.

Indium Tin Oride ITO Powder's Performance
Technical Parameters of Indium Tin Oride ITO Powder

Certificate of ITO Nanoparticles-ppm(In2O3:SnO2=90wt%:10wt%)
Purity	Al	Sb	Cd	Cu	Fe	Pb	Ni	Si	Zn	Co	As	P	Ca	Mg	Bi
99.99%	1.88	3.30	1.00	2.55	3.50	9.38	1.00	5.88	2.55	0.58	1.48	0.52	1.39	2.49	9.12

It is simple. Indium Tin Oxide ITO Powder produced?
ITO powder is usually prepared by oxidizing metal tin and metal indium to make indium oxide and tinoxide powder, then dispersing and mixing indium oxide and tinoxide powder. As the controlling conditions, metal indium, metal tin and mixing speed are not always synchronized, the ITO powder can be difficult to make. The ITO film's quality is affected by the large particle sizes of the tin powder. To solve the issue of uniformity in ITO powder, co-precipitation is another method. To dissolve indium and tin metals, this method employs nitric acid. The mixture is then mixed with tin and indium, according to their ratio. Ammonia then serves as co-precipitate. The co-precipitated alkali is obtained by precipitation. Finally, the indium tinoxide can be obtained through calcination.

Applicaciones Indium Tin Oxide ITO Powder:
ITO, an optoelectronic substance that is widely used in both industry and research, can be described as Indium Tin Oxide (ITO). ITO can also be used in flat panel displays and smart windows. ITO is also used to make the glass substrate. This helps reduce energy consumption.

The ITO green belt This is used to make fully functional, flexible and electroluminescent lamps. Additionally, it can be used for producing fully functional and adjustable electroluminescent lamps. ITO film This film can be used as an antireflective coating in both liquid crystal displays and electroluminescence.

ITO is used commonly to create transparent conductive coats for display (including liquid crystal displays, OLED screens, plasma displays, touch panel displays, touch panels and electronic ink applications). ITO film also serves as an organic light-emitting device, solar cell, antistatic coating, and shielding. ITO (or hole injection layer) is used in organic light emitting diodes.

ITO coated glass ( indium tin oxide glass ) is part of the TCO (transparent conduct oxide) category. ITO glass It has low resistance to light and good transmission of light.

It is used to remove the ITO film from the windshield. By applying a voltage on the film, heat is created.

ITO coating ITO is used in many optical coatings. There are many other applications for ITO, including gas sensors and anti-reflective coats. Electrowetting on dielectrics is also possible. Finally, Bragg reflectors to VCSEL Lasers are another use. ITO can be used for infrared reflections on low emissivity glass panes. ITO was first used in the Kodak DCS 520. Later Kodak DCS cameras utilized ITO to increase the blue channel response.

ITO thin film strain gages operate at temperatures of up to 1400degC. They can be used even in hostile environments, such as jet engines or gas turbines.