3D Printing Alloy Spherical Cobalt Powder

As spheres, you can purchase cobalt powder. Only a small number of chemical-based or submicron nanopowders is available.

Additional information regarding 3D printing aluminumspheres by cobalt Powder Co.

Product description Spherical Cobalt Powder Co

Product Description 15-50mm 15-53mm. 45-75mm. 45-105mm. 75-150mm. (Can be adjusted according to customer needs.

Pulverization efficiency rates 99.9%. It's very pure, and contains low amounts of oxygen. Satellite balls are unable to predict which type of particle may be present. The peak flow rate for particles larger than 5g/cm3 is 12.0s/50g

Additional technologies.

Cobalt can be used to make heat-resistant alloys. Cemented carbide can also be made with cobalt. Cobalt-based alloys are used to make turbine blades. Impellers. conduits. Rocket engine parts. Rocket engines. The use of heat-resistant materials is required for high-duty applications. Cobalt could be used in powdermetallurgisty to act as a bonding agents. Cobalt might be an integral part of cement carbide. Cobalt could be helpful in many areas, such as electronic coatings or thermal spraying.

Cobalt was found within the spherel in high quantities.

Cobalt Powder Storage Terms

Cobalt-based powders can lose effectiveness and disintegrate over time. Spherical Pulver can be vacuum packed to ensure it stays dry. Spherical Cobalt Pulver is more delicate because of its rarity.

Packing and Shipping for Spherical Cobalt Powder

It is the best option. This is your requirement for Spherical Cobalt Pulver.

Cobalt Pulver Pack, Vacuum Packaging 100g-500g 1kg/bag 25 kg/barrel

After payment has been received the Spherical Cobalt Pulver along with water will be sent. This item can be shipped by mail.

Spherical Pulverized dust from Cobalt Properties

Alle anderen Titel Cobalt Powder
N/A
Combination Formula Co
Mobility N/A
Appearance There are many options for finding gray metal dust.
Melting Point N/A
Water solubility N/A
Density NA
Purity N/A
0-20mm, 15-45mm, 15-53mm, 53-105mm, 53-150mm, 105-250mm
Boling Point N/A
N/A
Higher Thermo Conductivity N/A
Thermal Expansion N/A
Younger's Modular N/A
Exact N/A
Monoisotopic N/A

Safety & Health Information

Security Notification N/A
Hazard Statements N/A
Flashing Point N/A
Hazard Codes N/A
Risk Codes N/A
Privacy Statement N/A
TECS # N/A
Transport Information N/A
Germany N/A

Inquiry us

NEXT 3D Printing Powder

Our Latest Products

Metal Alloy High Temperature Inconel718 Alloy Tube

For heating baths you can use inonel718, a heat-resistant metal. AlloysteelInconel718 alloysteel tube Chemistry (5055) Cr (1721). Fe Mo Residues (2.83) Nb (6.56.50). Co (1.0). Co (1.0). Mn (0.35), Si (0.335) S (0.015). Cu (3.3%). Al (0.20…

3D Printing Alloy Metal Materials Stainless Steel 440C Metal Powder

Stainless Steel 440C Powder can be used in laser/electron light beam additive production (SLM/EBM), laser direct deposition (DLD), powder warm isostatic pushing (HIP), etc.Bit dimension: 0-45 μm, 0-53 μm, 15-45 μm, 15-53 μm, 45-105 μm. Use: 3D printi…

3D Printing Alloy Spherical Tantalum (Ta) Powder CAS 7440-25-7

Round Tantalum powder is gray black, chemical formula Ta, submicron and also nanopowder forms might be thought about for commercial and application purpose. The look of Round Tantalum powder is grey black pwder. It mainly applied in the 3D printing.C…