High Purity Zirconium Carbide ZrC Powder CAS 12070-14-3, 99%

Zirconium Carbide Pulver:
Zirconium carbide ZrC It is used commercially to cut tooltips. It is often sintered. Zirconium carbide It is hard. Zirconium carbide melting point 3504degC Zirconium carbide Point boiling Temperature is 5100degC The apparent density of the material is 6.70 g/cm3. Mohs hardness ranges from 8-9 Is insoluble with cold water and hydrochloric acids. It dissolves in hydrofluoric and hot concentrated sulfuric, containing either nitric acid (or hydrogen peroxide). At high temperatures, it reacts with chlorine to make zirconium trichloride. It burns at 700C in the air and produces zirconia. You should not mix it with water.

ZrC powder It is a powder of gray metal with cubic crystal structures. High resistance to corrosion. These interstitial transition metal carides of group IV are members of the ultra-high temperatures ceramics (UHTC). ZrC's thermal conductivity is 20.5 W/m*K, and its electrical conductivity (resistivity at 43mO*cm) are both similar to zirconium. Due to the strong ZrC covalent bond, ZrC has a very high melting temperature (3530degC), high module (440 GPa), as well as a low hardness (25 GPa). ZrC's density is 6.73g/cm3 lower than that of other carbides, such as TaC (14.75 g/cm3) or WC (15.8g/cm3). ZrC appears to be suitable in reentry, rocket/hyperjet and supersonic aircraft where high density is a critical requirement.

As with most carbides from refractory materials, zirconium carbonide is substoichiometric. It contains carbon vacancies. If the content of carbon exceeds ZrC0.98, it is considered free carbon. Between 0.65 and 0.98, the ZrC-to-carbon ratio to metal is stable.

To receive the latest information, send us an inquiry Zirconium carbide price Please fill out the form below if you wish to buy Zirconium Carbide ZrC Powder In bulk.

Zirconium Carbide Nanoparticles Nano ZrC Pulse Product Performance:

Name of the product	MF	Purity	Particle Size	Crystal Form	SSA	The color of the sky
Zirconium Carbide Nanoparticles	ZrC	99%	20nm	Cubic	11m2/g	Black

It is simple. Zirconium Carbide ZrC Powder produced?
Zirconium carbonide can be made in many different ways. A carbothermal reaction is the one that occurs between zirconia (graphite) and zirconium carbide. This produces powder. By sintering ZrC at temperatures higher than 2000°C, dense ZrC is possible. ZrC powder can also be hot pressed to lower its sintering temperatures, resulting in fine ZrC particles. Full-density ZrC can be made by spark plasma sintering.

You can also make zirconium carbide using solution-based processes. It is done by heating the metal oxide in acetylacetone.

Chemical vapor deposition (CVP) is another method of manufacturing. It is possible to heat the zirconium sponge, and also decompose the gas halide.

ZrC cannot be used if it has a lower oxidation rate than 800°C. The preparation of composite materials is one way to increase the resistance to oxidation for ZrC. ZrCzrB2 is the preferred composite material. These composite materials are capable of working at temperatures above 1800 degrees Celsius. This situation can be improved by using another material, such as TRISO fuel particles as a barrier.

Applicaciones Zirconium Carbide ZrC Powder:
Zirconium carbide is a type of high melting material that has high hardness, excellent heat refractory and high hardness. This material is commonly used to make alloy steel. Also used in zirconium tetrachloride production. Zirconium carbonide can be used incandescently. It's mainly used now as an abrasive. This can be used to make cemented carbide.
Zirconium carbonide is a ceramic hard material that can be used for cutting. The zirconium carbonide (ZRC), which is made by sintering has excellent high-temperature resistance to oxidation, strength, hardness and good thermal conductivity. Additionally, nanopowders of zirconium carbonide (ZrC), exhibit high visible light absorption, great infrared reflection, and have large energy storage capabilities.
Coating material
As refractory coats in nuclear reactors, ZrC is not used. It is less susceptible to radiation damage and has a lower neutron absorption. You can use it as a protective coating on uranium dioxide, OR dioxide particles and nuclear fuel. Coatings can be deposited using superheated chemicalvapor deposition in an fluidized bed reactor. The material has excellent emissivity at high temperatures and high current capacities, which makes it ideal for use in thermo-photoelectric heaters, field emitter tips, and arrays.
Concrete tools
These cemented carbide compound can be used to drill and make other tools with wear resistance because of their hardness. Zirconium carbide, also known as ZrC (zirconium carbide), is a highly-valued high-temperature material that has high melting points and excellent strength. This material can be strengthened and resistant to corrosion by using cemented carbide.
Nanostructured parts
Zirconium carbide nanoparticles may be used in nanostructured parts in the metalurgical, chemical, aerospace and other industries. The textile industry can use it to produce nylon, fiber and carbonide thermostatic textiles. They are also used in composites for metal substrates and ceramics.

Transport and packing of Zirconium Carbide Nanoparticles Nano ZrC Pulp:
We offer many packing options that are dependent on the quantity of zirconium-carbid nanoparticles.
Zirconium carbide nanoparticles packing: You can vacuum pack 1 kg/bag, 25kg/barrel or according to your requirements.
Shipment of Zirconium Carbide Nanoparticles Shipments could be made by sea or by air once payment has been received.


Whatsontianjin advanced materials Nano Technology Co. Ltd., (Whatsontianjin), is a reliable global chemical material supplier and manufacturer. With over 12-years of experience, Whatsontianjin has been providing high-quality chemicals, Nanomaterials, such as boride, nitride, graphite, sulfide, and 3D printing powders.
We can provide high-quality zirconium carbonide powder. Please contact us to send an inquiry. ( brad@ihpa.net )